|==================================================================================
	X64-CL Driver for Sapera LT Imaging Library for Windows 2000/XP
	1.51.00.0345 Release
	September 19th 2006
	
				
Table of Contents

	- Installation Notes
	- Disk Contents
	- Hardware Supported
	- New Features
	- Fixes
	- Driver Notes


Installation Notes

	Please consult the X64-CL User's manual for detailed installation procedure for the supported Operating Systems.


Disk Contents

	Install root dir

		readme.txt
	\Bin
		X64 Viewer program
		WCLoader firmware loader program
	
	\FPGAs
		FPGAs

	\Help
		X64-CL User Manual in Help format        
		X64-CL User Manual in PDF format 

	\PnP	
		Windows 2000 Plug & Play driver files


	Windows system directory (winnt\system32)                       
		Dynamic Link Libraries (DLL's) 

	Windows driver directory (winnt\system32\drivers)       
		Device driver files   

	Windows inf directory (winnt\inf)
		Device driver information file  


Hardware Supported

   - X64-CL Full Rev A3 and up (with 32, 128 and 256 MB of on-board memory)
   - X64-CL Dual Rev A3 and up (with 32, 128 and 256 MB of on-board memory)
   - X64-CL Full (EM PCB) Rev A1 and up (with up to 2GB of on-board memory)
   - X64-CL Dual (EM PCB) Rev A1 and up (with up to 2GB of on-board memory)

New Features/Optimizations

Fixes
	- same driver as 1.50.00.040, only the fpgas have change.
	- Snap of n frames in linescan: 1 frame less could be capture under certain condition.
	- When capturing a variable frame length, false events "miss trig" could be generated.
	- Fix memory controler for the X64-CL EM: with the new memory chip the board couldn't initilize the board memory controler. the grab 	  would allways fail.
	- Fixed long delay when running Device Manager with boards that have an eeprom not initialized.
	
Driver Notes

   - Compatible with Sapera LT version 5.0 and later.
   - Cropping width must be a multiple of 8 pixels.
   - Hactive must be a multiple of 8 pixels/Taps with muti-tap camera and the X64-CL
   - Hactive must be a multiple of 16 pixels/Taps with multi-tap camera the X64-CL EM
   - With X64-CL revision A2 the PC must be rebooted after a firmware update.
   - Camera 8 taps segmented is not supported
   - The maximum number of host buffers with a dual channel (interleaved lines) camera is 63 buffers.